PCBs, kits and bundles

 

 

  

Additional information

  • FAQ
     
  • Images are for illustrative purposes only.
     
  • Please contact us for pricing if you wish to purchase larger quantities.
Full details on all the kits can be found on the project pages.

  LED Cube     see project page

The LED Cube kit is not suitable for beginners to electronic construction.

You should have reasonable electronic construction skills, and soldering technique.  Access to a voltmeter or multimeter is desirable and some understanding of what is shown in the schematic diagram will be useful.

PCB Only
Includes:
  • 1 x PCB555 only

£12.99   

Download overlay for link wires

 

 

 
PCB with pre-programmed PIC 16F688

+

 

 Includes:
  • 1 x PCB555
  • 1 x PIC16F688 programmed with LED Cube firmware

£16.50    

Short Kit 555FSK

You should have reasonable electronic construction skills, and soldering technique.  Access to a voltmeter or multimeter is desirable and some understanding of what is shown in the schematic diagram will be useful.

 Includes:
  • 1 x PCB555
  • 1 x PIC16F688 programmed with LED Cube firmware
  • 2 x CAT4016 LED driver IC's
  • 5 x BC635 transistor
  • 2 x 1K8 resistors (R1,R2)
  • 1 x 10K resistor (R3)
  • 1 x 270R resistor (R4)
  • 3 x 10uF / 10V tantalum capacitor
  • 3 x 100nF ceramic capacitor
  • 1 x 3mm green LED
  • 1 x tactile switch
  • 1 x 14 pin DIP socket
  • 1 x 32 way SIL header
  • 4 x 10mm spacer
  • 4 x M3 x 6mm pan head screw
  • 1 x DC power jack 2.1mm

(kit does not include main cube LEDs or power supply)

£23.95   

  PWM LED Chaser  

Options for the linear and round UFO chaser

This kit is simple and straightforward to build.  If you can solder you should be
able to build this project successfully by following the instructions on the project page.

PCB Only


 

PCB430A

PCB only
PCB432C 
PCB only
Complete kit
(linear chaser)

 see project page

Kit including pre-programmed PIC16F628A with 34 different chase effects.
(LEDs sold separately, see below)

kit contents

Assembly reference image

  £9.99

The DC power jack supplied with this kit has a 2.1mm centre pin.  Power supply not included.

Complete kit
(UFO Round Chaser)
see project page

Kit including pre-programmed PIC16F628A with 34 different chase effects.
(LEDs sold separately, see below)

kit contents

  £9.99  

 
LED Options

Qty 8 x 5mm LEDS 
LEDs are high brightness, clear package.

LED Colour
Video showing some of the included chase sequences in the programmed PIC supplied with the kit.

 4 Channel DMX512 Driver    see project page

  • If you would like to test the firmware before purchasing you can download a demo version of the DMX driver firmware from the project page.
     
  • PIC supplied is code protected.  

Pre-programmed PIC only


 PIC16F688 (PDIP package) pre-programmed with 4 Channel DMX512 Driver firmware.

We can also supply this in a SOIC14 package, please state SOIC14 in the comments at the checkout.
DMX controller PIC only
 
PCB + Pre-programmed PIC


 
PCB800 & PIC 16F688 pre-programmed with DMX Firmware
Complete kit

Complete kit of parts, including PCB800 and pre-programmed PIC16F688 with DMX firmware

kit contents

Assembly reference image

 
Address PCB only

 DMX Address Board PCB801 only
PCB801 only

Power MOSFET RGB LED PWM Driver    see project page

 

 There are three options for buying this project.  PCB106 only, PCB106 with pre-programmed PIC or a complete kit of parts as shown in the photo (left)
PCB106 only
PCB106 + Pre-programmed PIC
Complete kit

kit contents

Assembly reference image

We've also done a detailed assembly guide for this project on the Instructables website.

The pre-programmed PIC 12F6xx includes a range of sequences. See datasheet for details. datasheet

  RGB LED Controller    see project page

 

 

The original PICPROJECTS RGB controller.

Simple to construct and very effective with everything contained on the one PCB.  Use high brightness red, green and blue LEDs, fit into a suitable lamp and you can build your very own mood lamp. 

Options

The pre-programmed PIC 12F6xx includes a range of sequences.
See datasheet for details.

datasheet

This project is not available as a complete kit

  F1 Gantry Race Start Lights    see project page

If you want custom timings please contact us before ordering.

PCB + pre-programmed PIC16F684


 

 PCB500 and PIC16F684 pre-programmed with the F1 Gantry Race Start Controller firmware
Qty 1   £9.99    
Complete kit of parts including
pre-programmed PIC16F684

 

 Complete kit of parts to build the F1 Gantry Race Start Lights controller board, including PIC16F684 pre-programmed with the F1 Gantry Race Start Controller firmware
Qty 1   £19.95      
Does not include the LED cluster modules or power supply.  See main project page for suppliers of these parts.
Fully assembled and tested control board.

 Fully assembled and tested F1 Gantry Race Start Lights controller board.
Qty 1   £34.95    
Does not include the LED cluster modules or power supply. See main project page for suppliers of these parts.